Type 313 /999 anomaly code interpretation: AA; Leaking; Machine floor water; Treatment of leaks

Reason: filter element. Pipeline. Joint. Condensate water in ice tank. Ice cylinder electric heat pipe..

Type 313 /999 anomaly code interpretation: IE; Hot cylinder overflow; Inlet solenoid valve

Reason: Water pressure is higher than 3 kg. The water inlet solenoid valve is not filled with water or the solenoid valve is abnormally powered.

Type 313 /999 anomaly code interpretation: EA; Water supply; Water intake problem of drinking machine

Cause: Water inlet solenoid valve. Water source switch. Stop the water. Regulating needle valve. Filter element. The water

Type 313 /999 anomaly code interpretation: EO; Drainage; Sterilization sterilization solenoid valve

Cause: More than water sterilization solenoid valve or solenoid valve abnormal power supply.

Type 313 /999 anomaly code interpretation: lL.hh; Hot cylinder temperature sensor

Reason: hot cylinder temperature sensor; Short circuit

Type 313 /999 anomaly code interpretation: AL.AH

Reason: temperature cylinder temperature sensor; Short circuit

Type 313 /999 exception code interpretation: Cl.ch

Reason: ice cylinder temperature sensor; Open circuit, short circuit, sensor water

Type 313 /999 anomaly code interpretation: EE; Abnormal temperature of hot cylinder; Electric heating tubes do not heat

Cause: The electric heating tube is faulty. The host board does not supply power.

Type 313 /999 anomaly code interpretation: AE.CE0; Abnormal sterilization; Temperature and ice cylinder temperature sensing failure

Cause: Electric heating tube, perceptron, main board do not supply power.

Type 313 /999 anomaly code interpretation: AA; Water level is

Cause: rusting. Silicon gel crack. Water mark. Motherboard

Type 313 /999 anomaly code interpretation: CF; Change filter element prompt

Reason: Need to replace the filter element

Type 313 /999 anomaly code interpretation: 0000; In the power saving

Treatment: press the reboiling key to remove the day of power saving.

Type 313 /999 anomaly code interpretation: host board; The machine board is wet. The wiring contact is not good.

Treatment: dry and blow-dry board. Replace the host board or display panel

Model 313 /999 General fault: Water pooled on the ground after use

Fault cause: Water box spatter. Water box drain R180 crack. The drainage is blocked.

Type 313 /999 general fault: leakage; Carry meter 2M ohm measurement

Treatment: black stick with the case of red stick measuring water dispenser plug. One by one measure the thermal ice heating tube and suspected leakage parts.

Type 313 /999 General fault: ice water is not ice; Compressor in operation

Fault cause: large amount, refrigerant leakage, pipeline blockage.

Type 313 /999 General fault: ice water is not ice; The compressor is not running but the fan is

Fault cause: relay. Overload protector compressor is faulty

Type 313 /999 general fault: no water; The hot ice button plays a flute

Cause: U-600 board, transformer, transformer and board wiring fault

Type 313 /999 general fault: no water; There is no flute when you press the hot ice button

Cause: The hot water temperature is less than 90 ° C, and the keys or key row is faulty

National service telephone number of Hezhong Company: 0752-2781166